HIGH #5 is ready to use high build primer/filler in an aerosol. It is used for priming uneven surfaces before top coating.
High #5 is capable of producing a coating of a film thickness similar to that of a spray gun applied primer. The convenience of using a high build primer in an aerosol means that masking is kept to a minimum. Mixing paint and cleaning spray equipment are avoided as a result of using HIGH #5 leading to savings in time and materials.
HIGH #5 is cromate free and easy to sand.
Part # UP0791V UPO763 UPO783 791 763 783 0791 0763 0783
INSTRUCTIONS
HIGH #5 can be applied to the following surfaces:
- Fully cured paint.
- Polyester body fillers and F.R.P.
- Thoroughly clean and degrease surfaces with a suitable panel wipe or thinner. Abrade wet or dry with 280-320 grit abrasive, re-clean, dry and degrease.
Application
- Shake can thoroughly before use for a minimum of 2 minutes. Apply 1-2 light even coats.
- Allow 5-10 minutes flash off time between coats.
Drying time
- Allow 60 minutes before sanding & overcoating.
- Drying time is dependent upon film thickness, humidity and temperature.
UPol U-Pol UP0763 UP0791V UP0783 UPO763 UPO791V UPO783 763 0763